Re: i1Profiler linearization
Re: i1Profiler linearization
- Subject: Re: i1Profiler linearization
- From: Scott Martin <email@hidden>
- Date: Wed, 07 Aug 2013 07:35:55 -0500
> The original testing and ink limiting for the media was done using Onyx 6.5, that media library was imported into Onyx 7.3.2. It should have brought the linearization over in the import.
That explains it! You just can't get a good profile on a printer like that without starting with a good lin. You might also double check that the other settings carried over as well.
If you feel up to the task, it might be smart and start the whole ONYX Media Manager "Create new profile" over from scratch and go through the whole process to make sure you're optimizing everything from the start. On a solvent printer the results are so great when everything is perfectly dialed in. Unfortunately with a lot of the supplied profiles that's not the case.
And BTW you can still use i1Proifler for the final profile.
Scott Martin
www.on-sight.com
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden