Re: Import curved VPR data from Curve2 into i1Profiler
Re: Import curved VPR data from Curve2 into i1Profiler
- Subject: Re: Import curved VPR data from Curve2 into i1Profiler
- From: Pat Herold <email@hidden>
- Date: Tue, 18 Jun 2013 10:38:08 -0700
Hi Steve and Terry,
Curve3 has indeed been updated to work with i1Profiler. So curved VPR data and exported P2P measurements, any Curve3 export - can be imported into i1Profiler directly.
Pat Herold
CHROMiX
>
>
> From: Steve Miller <email@hidden>
> Date: June 17, 2013 6:47:41 AM PDT
> To: "'colorsync-users?lists.apple.com' List" <email@hidden>
> Subject: Re: Import curved VPR data from Curve2 into i1Profiler
>
>
> Terry,
> That worked! Thanks!
>
> Something to maybe add to Curve software? Be able to import VPR curved
> data directly into i1Profiler? Or, is this available in Curve3?
>
>
>
> --
>
> Steve Miller
> Color Management Specialist
>
> "Quality Begins Here"
>
> BIC Advertising & Promotional Products
> 1000 3rd Ave. SW
> Sleepy Eye, MN 56085
>
> Tel.: (1) 507 794 8203
> E-mail: email@hidden
> www.norwood.com / www.bicgraphic.com
>
>
> CONFIDENTIALITY NOTICE
> This electronic message is confidential and may contain legally privileged
> information intended only for the use of the individual or company named
> above. If the reader of this message is not the intended recipient, or the
> employee or agent responsible to deliver it to the intended recipient, you
> are hereby notified that any dissemination, distribution or copying of
> this communications is strictly prohibited. If you have received this
> communication in error please immediately notify us by telephone, and
> return the original message to us at the address below.
> IRS Circular 230 Disclosure: As provided for in Treasury regulations,
> advice (if any) relating to federal taxes that is contained in this
> communication (including attachments) is not intended or written to be
> used, and cannot be used, for the purpose of (1) avoiding penalties under
> the IRS Code or (2) promotion, marketing or recommending to another party
> any transaction or matter addressed herein: Norwood & BIC Graphic, 14421
> Myerlake Circle, Clearwater, FL 33760. www.norwood.com / www.bicgraphic.com
>
>
>
> On 14/06/2013 8:07, "Terence Wyse" <email@hidden> wrote:
>
>> Hi Steve, all you have to do is open the exported data in PM5 Measure
>> Tool, re-save it from Measure Tool with a new name and then bring that
>> into i1Profiler....it'll work.
>>
>> When you import that file into i1Profiler, you'll likely be asked for the
>> calibration standard (XRGA or whatever) and maybe the measurement
>> condition (M0, M2).
>>
>> Good luck!
>>
>> Terry
>>
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden