RE: Art Duplication
RE: Art Duplication
- Subject: RE: Art Duplication
- From: Roger Breton <email@hidden>
- Date: Thu, 17 Sep 2015 12:50:18 -0400
Lou,
FWIW, have you ever experimented with shooting under direct "noon" kind of sunlight?
/ Roger
-----Original Message-----
From: colorsync-users-bounces+graxx=email@hidden [mailto:colorsync-users-bounces+graxx=email@hidden] On Behalf Of Louis Dina
Sent: 17 septembre 2015 10:15
To: Colorsync Users List <email@hidden>
Subject: Art Duplication
I want to duplicate some oil paintings on canvas. The surface is reflective, glossy, textured paints, and in places, the dimples of the canvas are visible. The oil paintings are coated with a gloss varnish of some sort. My tools are limited, but they'll have to do. I just want to get as close as I can using the tools I have. First, some background.
I'm using a Canon 5Dmk2, 85mm prime lens with circular polarizer, two Alien Bee studio strobes on either side with polarizer gels (cross polarized to eliminate reflections and glare) aimed at 45°angles. I'm photographing the artwork with a small Color Checker and a Spyder Cube (for the light trap) to help me assess tone and color.
I built a custom camera profile using XRite Color Checker Passport and I'm processing the images in LightRoom. I know, not perfect.
In the past, I had a tough time getting even a lone color checker to reproduce fairly accurately until I forced the 6 neutral patches to match the L* values of my CC target (which I read with my Eye One with UV Cut filter). Once I got the L* values of the 6 neutral patches right, the 18 color patches measured fairly close to my spectro readings. Close enough for me. My conclusion is that the default LR settings are so contrasty, even with a "linear" Tone Curve, that it pumps everything way up and whacks the colors.
In LR, I apply my custom camera profile, Click-WB on the 50% gray patch (which is the closest to dead neutral on my CC target), then manually adjust the Tone Curve to match the neutral L* values of my CC to match my spectro readings. My first photos of the artwork had some flare/glare/reflection due to the high gloss shine, so when I got the CC Target looking right, the paintings looked washed out and flat. I assumed this was the reason the CC looked right, but the painting did not. That's when I decided to try polarized light sources and a polarizer on the camera lens. It definitely helped and I am pleased with the improvement.
However, even with the polarized images, if I force the L* values of the 6 neutral CC patches to match my spectro readings, the images still look a bit flat and washed out. The CC itself looks great and all the patches measure pretty close.
I can adjust the image so it DOES look pretty accurate by eyeball, but then the contrast of the color checker ends up being high. Mainly, I have to darken the darken the black and Dark Gray patches so the painting looks right. I'm hoping to come up with a method that doesn't rely so much on memory and feel.
I'm baffled as to why this would be? (unless I still have some flare). Any thoughts or suggestions? (additional equipment or software is not a consideration at this time).
Thanks,
Lou Dina
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden