Re: DTP-41 question
Re: DTP-41 question
- Subject: Re: DTP-41 question
- From: "Miller, Steve" <email@hidden>
- Date: Fri, 14 Apr 2017 20:25:00 +0000
- Thread-topic: DTP-41 question
If I remember correctly, use ToolCrib to load a reference file that came
with the reflectance reference.
It will remember the latest reference that was loaded using ToolCrib.
STEVE MILLER
Color Management Specialist
BIC Graphic North America / 1000 3rd Ave. SW, Sleepy Eye, MN 56085
Tel: (1) 507 794 8203
Email: email@hidden
www.bicgraphic.com / www.norwood.com
CONFIDENTIALITY NOTICE
This electronic message is confidential and may contain legally privileged
information intended only for the use of the individual or company named
above. If the reader of this message is not the intended recipient, or the
employee or agent responsible to deliver it to the intended recipient, you
are hereby notified that any dissemination, distribution or copying of
this communications is strictly prohibited. If you have received this
communication in error please immediately notify us by telephone and
return the original message to us at the address above.
On 14/04/2017 2:20, "Roger Breton" <email@hidden> wrote:
>I was given two almost brand-new DTP-41UV units. It breaks my heart to
>throw
>them in the garbage.
>
>But I got only "one" Color Reflection Reference for both. Given that these
>things are next to impossible to find, new, I was wondering .
>
>
>
>I sort of vaguely remember that the old ToolCrib allowed a Terminal mode
>with the instrument.
>
>I remember long, long ago, when buying a fresh Color Reflection Reference
>from X-Rite, that the data from the new Reference had to be "downloaded"
>into the instrument? Pretty sure.
>
>
>
>Now, I tried the instrument with the old MeasureTool (5.1) and, after
>pressing the Start button, to measure, say, the two strips RGB TC2.83
>target, the software appears to enter right into "measurement mode", as
>though no calibration of any kind was necessary?
>
>
>
>Question: is it possible to use one of those DTP41 "without" a Color
>Reflection Reference?
>
>Will the instrument "remember" to use the last downloaded reference into
>its
>memory?
>
>
>
>I have to dig into the old ToolCrib PDF I found in my moth balls but if
>any
>knows.
>
>
>
>/ Roger
>
> _______________________________________________
>Do not post admin requests to the list. They will be ignored.
>Colorsync-users mailing list (email@hidden)
>Help/Unsubscribe/Update your Subscription:
>.com
>
>This email sent to email@hidden
>
>______________________________________________________________________
>This email has been scanned by the Symantec Email Security.cloud service.
>For more information please visit http://www.symanteccloud.com
>______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden