RE: Audio Units - newbie questions
RE: Audio Units - newbie questions
- Subject: RE: Audio Units - newbie questions
- From: "Muon Software Ltd - Dave" <email@hidden>
- Date: Thu, 13 Oct 2005 11:43:28 +0100
- Importance: Normal
> But are you getting sound out correctly on each of your output buses?
> I think it might kind of work because AUBase's RenderBus call will
> ONLY call your render call once and I suspect almost by accident it
> might be getting the output data because of what you're doing with
> the element's buffer lists. I would certainly not want to guarantee
> that this would always work.
I made a few modifications in line with Olivier's suggestions about using
PrepareBuffer and ZeroBuffer, and it all works just fine now in Logic Pro
7.1.1 - I can see the correct channels (3-8) in the Aux strip when the
instrument is loaded, and they connect up fine and sound comes through like
you'd expect.
However in Logic 6.3.3 and Logic 5.5.0, I get no sound when the instrument
is loaded as Multichannel, and an incorrect number of channels displayed
against the instrument in the Aux strip (3-16). I don't know if this is a
throwback to earlier versions of the AU that declared 8 output busses (I
didn't initially realise output busses were stereo), and if it is how do I
force Logic to rescan? I tried removing and reinstalling the AU but that
didn't help.
Pavol did mention that a "long workaround story" was necessary to get things
working in Logic prior to v7. I think I'm ready to hear that long story now
:-)
Regards
Dave
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Coreaudio-api mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden