Re: AULab documents
Re: AULab documents
- Subject: Re: AULab documents
- From: Klaus Roethlisberger <email@hidden>
- Date: Wed, 09 Sep 2009 08:14:36 +0200
Hi Michael, thanks for reply
Bus drawer = on input tracks is a folddown menu ( drawer ? ) to assign aux sends to bus
If I setup a bus send i.e. post, and later I revisit this folddown menu and just let it close,
( 0r click somewhere else )
it will change the send to 'pre'.
Michael Hopkins wrote:
klaus,
I will look into your AULab issues. What do you mean by "bus drawer" in
your first issue? Can you give me some steps so I can reproduce this?
Thanks
michael
On Sep 3, 2009, at 11:17 PM, Klaus Roethlisberger wrote:
Thanks for reply !
and yes, with AU Lab 2.01 I was able to open the documents and save, then
open with AU Lab 1.03.
Other issuea with AU Lab 2.01 are here
1. Reopening the bus drawer resets the bus to 'pre' !
2. Input meters don't show here in AU Lab( MotU 896mk3 ), only with
versions 1.xx
3. I am unable to change i.e. input / output names , just the 1st
input name
Thanks and
best regards
Klaus
William Stewart wrote:
This is the list for questions about AULab. Do you have your issues
solved?
Bill
On Aug 31, 2009, at 3:02 AM, Klaus Roethlisberger wrote:
I was able to open the documents in question with AU Lab 2.01
Is there a special 'AU Lab' list ?
Thanks a lot
and best regards
Klaus
Thanks for reply
in my first post I wrote
I use AULab 1.03, input levels don't show on later versions on my
rigs...
And I use 10.4.11 because of software that will not run on 10.5.xxx
rigs means another Mac, another interface ( same type interface )
I start to suspect the interface and its internal ( ? ) number,
because upon trying to open the document created on another Mac, I
get the message that the interface was not found, although
an exact same type is present in the FW bus ...
thanks and best regards
Klaus
tahome izwah wrote:
When you say "rig", you mean computer...?
The latest AU Lab version is 2.0.1 on 10.5.8 - any particular reason
why you are working with 1.0.3 on 10.4.11? I'm pretty sure documents
from newer versions of AU Lab work ok when moved between machines (as
a matter of fact I remember doing this not long ago - I am using a
clone of my MacPro system on my MacBook Pro and I never had any
trouble opening AU Lab documents there).
HTH
--th
Hi , first post, greetings to everyone
AULab is very helpfull
I use AULab 1.03, input levels don't show on later versions on my
rigs...
but
I can't open a document on another rig, similar audio interface (
same type
but a second unit )
Even when saved without AU plugs...
Rig 1 : Mac mini intel 10.4.11
Rig 2 : G4 mdd 10.4.11
Can somebody give an idea why the documents aren't interchangable
between
different rig ?
The installed components seem to be the same
Thanks a lot
and best regards
Klaus
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Coreaudio-api mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Coreaudio-api mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Coreaudio-api mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden