Apple

On 11/01/2013, at 02:23, Eric Knapp <email@hidden> wrote:

Damian,

I would love to get a copy of the fixed code, too. No one else can see your radar at Apple. Have you put it up on Open Radar?

Thanks,

-Eric

On Thu, Jan 10, 2013 at 1:13 PM, Damian Carrillo <email@hidden> wrote:

Hi Bob,

I took a look at this and fixed the problem. I attached a zip file with a fixed version of MixerHost project to a bug I filed at bugreport.apple.com. The bug has the Problem ID of 12990482.

I've seen this problem before in my own code and it usually stems from modifying the view hierarchy in a nib file. In this particular case, the MixerHostViewController.xib file had an additional view controller that the root view was associated with.

I discovered the problem by running the sample project, inducing the crash, and then determining which view was incorrectly configured by taking the address of the view mentioned (in your case it was 0x1dd2d680), and calling recursiveDescription on it in the console. That will show the view hierarchy, and in this case it pointed to the exact location of the problem. After that, I opened the xib file, removed the additional view controller, and reconnected the view properly.

Hope this helps,

Damian

On Jan 10, 2013, at 12:34 PM, Bob Sabiston <email@hidden> wrote:

Hello,

   I am still desirous of fixing this bug. Controlling the volumes of separate inputs does not work on iOS for me. The Apple sample code "mixerHost" is available here, but it does not run for me on an iPad.

http://developer.apple.com/library/ios/#samplecode/MixerHost/Introduction/Intro.html

It crashes due to this error:

2013-01-10 12:28:15.789 MixerHost[19402:907] *** Terminating app due to uncaught exception 'UIViewControllerHierarchyInconsistency', reason: 'A view can only be associated with at most one view controller at a time! View <UIView: 0x1dd2d680; frame = (0 0; 320 480); autoresize = W+H; layer = <CALayer: 0x1dd2d6e0>> is associated with <UIViewController: 0x1dd33210>. Clear this association before associating this view with <MixerHostViewController: 0x1f037330>.'

*** First throw call stack:
(0x3abd32a3 0x334f297f 0x3abd31c5 0x37abbd7b 0x37abbc6b 0x39ad49d1 0x39ad0723 0x3ab5961b 0x37bf4245 0x37bf3ac3 0x37aec025 0x37a7646d 0x3be7d 0x37ab7ad9 0x37ab7663 0x37aaf84b 0x37a57c41 0x37a576d5 0x37a57123 0x36a545a3 0x36a541d3 0x3aba8173 0x3aba8117 0x3aba6f99 0x3ab19ebd 0x3ab19d49 0x37aae485 0x37aab301 0x3bdef 0x35f63b20)

libc++abi.dylib: terminate called throwing an exception
(lldb)

I know this isn't audio-related, but does anyone know what causes this bug? This is the best example for controlling mixer inputs -- it is too bad they have not kept it running. The code uses Interface Builder and a .xib file. I have always programmed my view stuff, so I am not sure how to fix this? I will look into it but just wondering if anyone else recognizes this.

Thanks if anyone knows,
Bob

Message: 5
Date: Mon, 31 Dec 2012 10:06:25 -0600
From: Bob Sabiston <email@hidden>
To: email@hidden
Subject: Re: unable to change volumes of mixer inputs? (iOS)
Message-ID: <81F59889-1D89-4898-9E58-email@hidden>
Content-Type: text/plain; charset="iso-8859-1"

I call the following to change the vol. This maybe called because either the
user pressed the hardware vol button or moved a UISlider

status = AudioUnitSetParameter(multiChannelMixerAU,
kMultiChannelMixerParam_Volume,
                                     kAudioUnitScope_Output, 0, value, 0);

Yes but is that not the control for the *entire* volume? I am trying to
control the volume of the inputs -- like, I have one laser sound that I only
want to play at half volume, another time I might want one character's noise
to increase while others don't Š that sort of thing.

Bob

Message: 3
Date: Sat, 29 Dec 2012 12:31:53 -0800
From: Andy Davidson <email@hidden>
To: Bob Sabiston <email@hidden>
Cc: "email@hidden Apple"
<email@hidden>
Subject: Re: also: unable to change volumes of mixer inputs? (iOS)
Message-ID: <CD049180.10962%email@hidden>
Content-Type: text/plain; charset="iso-8859-1"

Hi Bob

You are correct my code controls the vol of the output of the mixer. I am
very interested in your question. At some point in time I need to figure out
how to split stereo into separate channels and want to control the vol of
each channel separately. I have not had time to write the test code for this
feature

I found your original post

OSStatus result = AudioUnitSetParameter (mixerUnit,
                                          kMultiChannelMixerParam_Volume,
                                          kAudioUnitScope_Input,
                                          inputBus,
                                          newGain,
                                          0
                                          );
Is the scope correct? You use input, my example uses output?

Andy

It is supposed to be input if you want to change the input volume levels. That old sample code MixerHost was able to do it, but the same thing does not seem to work in my code. I am not sure what the problem could be, though. I wasn't able to get MixerHost to compile and run on my newer devices however. Anyone know what I might be doing wrong?

Thanks
Bob

_______________________________________________
Do not post admin requests to the list. They will be ignored.
Coreaudio-api mailing list      (email@hidden)

This email sent to email@hidden

_______________________________________________
Do not post admin requests to the list. They will be ignored.
Coreaudio-api mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:

This email sent to email@hidden

Do not post admin requests to the list. They will be ignored. Coreaudio-api mailing list (email@hidden) Help/Unsubscribe/Update your Subscription: This email sent to email@hidden

References:

>Re: unable to change volumes of mixer inputs? (iOS) (From: Bob Sabiston <email@hidden>)

>Re: unable to change volumes of mixer inputs? (iOS) (From: Damian Carrillo <email@hidden>)

>Re: unable to change volumes of mixer inputs? (iOS) (From: Eric Knapp <email@hidden>)

Prev by Date: Re: recording in float with AVAudioRecorder

Next by Date: stereo -> mono crashdown when using VPIO unit

Previous by thread: Re: unable to change volumes of mixer inputs? (iOS)

Next by thread: stereo -> mono crashdown when using VPIO unit

Index(es):

Date

Thread