Dear Cliff,
I have tried all the steps
told by you and when I say 'p' to print the partition table, it shows the
output as
Top level command (? for
help): e /dev/rdisk2
/dev/rdisk2
Command (? for help): t
Partition number: 3
New partition type:
MACOSX_MyContent
Command (? for help): p
/dev/rdisk2 map block
size=512
#: type
name length base ( size )
1: Apple_partition_map
Apple 63 @ 1
2:
Apple_Free 0+@ 64
3: MACOSX_MyContent
Apple_HFS_Untitled_2 16121776 @ 262208 ( 7.7G)
4:
Apple_Free 0+@ 16383984
Device block size=512,
Number of Blocks=16384000
DeviceType=0x0, DeviceId=0x0
But again if I list the
partition map using ‘L’ it shows following output:
Top level command (? for
help): L
/dev/rdisk2 map block
size=512
#: type
name length base ( size )
1: Apple_partition_map
Apple 63 @ 1
2:
Apple_Free 0+@ 64
3: Apple_HFS
Apple_HFS_Untitled_2 16121776 @ 262208 ( 7.7G)
4:
Apple_Free 0+@ 16383984
Device block size=512,
Number of Blocks=16384000
DeviceType=0x0, DeviceId=0x0
I think it only shows that
partition type is changed but actually it does not set the partition type to
new value.
Thanks,
Imran