question about tech note TN2118 (getting a remote kernel dump)
question about tech note TN2118 (getting a remote kernel dump)
- Subject: question about tech note TN2118 (getting a remote kernel dump)
- From: Herbert <email@hidden>
- Date: Fri, 02 Sep 2005 19:16:10 -0700
I tried all afternoon to make this work.
I've gone over the instructions several times.
I have three machines, one is a tower, one is a mac mini, and one is
a g5 imac.
The imac I set up as the server.
So far as I can see, both the server and the dump machines are set up
correctly.
I even went so far as to put all three machines on the same small
network with nothing else.
I can ARD from one machine to another, I can ping from one to another.
But when I dump the panic machine can't find the server. Either of
the panic machines can't find the server.
the two panic machines have os 10.4. the server has 10.3.9. I did try
booting the server from the 10.4 partition and setting it up as a
server, too, but that didn't help.
I can gdb from the server to the panic machine (and the panic machine
shows a connection).
I've checked the IP address of the server and the ip the dump machine
is supposted to send to and they are the same. I have all machines
set to manual with a static ip. There is no router however. I don't
know if that would cause a problem or not.
But nothing I have tried will let the panic machine dump to the server.
Help! (Please!)
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Darwin-kernel mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden