Re: [Fed-Talk] [Smart Cards] Tiger Login - DRAFT
Re: [Fed-Talk] [Smart Cards] Tiger Login - DRAFT
- Subject: Re: [Fed-Talk] [Smart Cards] Tiger Login - DRAFT
- From: Shawn Geddis <email@hidden>
- Date: Tue, 14 Feb 2006 08:11:02 -0500
Brian C.,
As noted earlier, whether you have an ActivCard v2 USB reader or the
SCM SCR331 Reader, it is best to just flash the reader to be fully
CCID compliant and remove the SCR331 & ActivCard drivers from your
system. If those drivers still exist on your system, they will match
the reader and be used rather than the more robust and stable CCID
Class Driver.
The Entourage 2004 issue you are referring to was related to needing
to have the card in the reader prior to launching Entourage 2004 (or
relaunching if you remove the card while using Entourage) - otherwise
Entourage would not "see" the card. You should check with your MS
TAM for details.
-Shawn
On May 23, 2005, at 4:39 PM, Brian Cadwell wrote:
We have noticed a few of our "flashed" ActivCard readers won't work
in 10.4
but the same hardware did work in 10.3. We didn't look into it very
deeply,
it seems to be hit and miss. We did install the ActivCard drivers from
Shawn's idisk, and all the "unflashed" ActivCard readers we tried
work fine.
The drivers a re probably a red herring, but I mention it for
completeness.
Anyone else notice this? On my iMac G5 I can use either my flashed or
unflashed card reader.
Also remember, if you try to use the card reader program
(installable from
the DVD) and it crashes, you'll need to reset your card reader for
anything
to work after that. Just unplug it and reinsert it.
I can't get Entourage to use my CAC however... It sees the
certificate but
errors out with the ever popular "unknown error" when I try to send
a signed
message.
bc
On 5/23/05 3:59 PM, "Brian Raymond" <email@hidden>
wrote:
Shawn et al,
I wanted to send this out to the list since it seems there are
some problems
with getting CAC cards working in 10.4. More so then logging in,
Web Site
access is important for myself and other because of the new PKI only
policies for some public sites.
Have you run into any problems or are things smooth for the most
part?
Details of our problems below..
I'm running a SCM 331 reader (CCID firmware), which works fine on
10.3
- Brian
- Shawn
___________________________________________
Shawn Geddis
Security Consulting Engineer
Apple Enterprise Division (Public & Private Sector)
Attachment:
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Fed-talk mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden