Re: PowerBook G4 to Connect Ethernet to RS-232 Console
Re: PowerBook G4 to Connect Ethernet to RS-232 Console
- Subject: Re: PowerBook G4 to Connect Ethernet to RS-232 Console
- From: Todd Sampson <email@hidden>
- Date: Wed, 08 Jun 2005 10:50:58 -0500
Hi Jason,
Mac OS doesn't have a built-in equivalent to HyperTerminal. But you can go
to www.versiontracker.com and search for zterm. When you launch zterm, it
lets you select the serial port that you want to connect to. If no ports
are offered, make sure you have installed the software that came with your
Ethernet to rs232 converter. You will also have to set up the baud rate and
other rs232 parameters.
Good luck,
todd
> From: Jason Buckalew <email@hidden>
> Date: Wed, 08 Jun 2005 22:13:45 +0700
> To: <email@hidden>
> Subject: PowerBook G4 to Connect Ethernet to RS-232 Console
>
> Hello All,
>
> My Powerbook does not have serial port so I have connected RJ45 cable from
> Ethernet port on my Powerbook and other end of Ethernet cable I have
> attached a RJ45 to RS-232 connector.
>
> I connect RS232 end to my Cisco router, but can not access the terminal
> using this configuration similar to how I can in Windows with Hyperterminal.
>
> Does anyone know how to do this with Mac OSX?
>
> Thanks.
>
> Jason
>
>
> _______________________________________________
> Do not post admin requests to the list. They will be ignored.
> X11-users mailing list (email@hidden)
> Help/Unsubscribe/Update your Subscription:
>
> This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
X11-users mailing list (email@hidden)
This email sent to email@hidden