Re: xemacs under version 2.3.3
Re: xemacs under version 2.3.3
- Subject: Re: xemacs under version 2.3.3
- From: Jeremy Huddleston <email@hidden>
- Date: Sun, 17 May 2009 19:33:43 -0700
Well it looks to me like it's trying Fmake_device() over and over for
a certain number of attempts until it gives up and moves on.
From the stack, it looks like xemacs is not liking the restult it is
getting from getaddrinfo() ...
hmm... it's certainly not something specific to xquartz. You can even
try reverting to your old version by uninstalling the current version
and installing 2.3.2.1 from the website. I suspect that you will
still have the same problem.
I'll look into it some more to see what I can dig up.
--Jeremy
On May 17, 2009, at 16:31, Samuel Isaacson wrote:
I do indeed. I'm able to run xterm, gv, and several other graphical
programs.
This time I waited a while after typing xemacs (before I was
probably only waiting 30 seconds or so since it always started
immediately in the past), and it finally did start. This seems to
work consistently, so the problem is not that it won't start, but
that it is taking much much longer to start than previously. (This
is for starting xemacs without loading any specific file.)
The output from the sample command is attached. The sample was taken
before the window appeared.
Thanks,
-Sam
Jeremy Huddleston wrote:
Just to confirm, if you run 'xterm', you get an xterm, right?
Can you sample the xemacs application as it's running and send me
the result? Just run 'sample <pid>' from your prompt, and it'll
save a text file in /tmp with the results.
On May 17, 2009, at 16:13, Samuel Isaacson wrote:
Hi Jeremy and William,
Thank you for your suggestions
I tried Jeremy's suggestion on upgrading all outdated ports, but
it made no difference. I also uninstalled and reinstalled the
xemacs package, but this also didn't help (in addition to trying
the specific upgrade command William suggested).
I then tried completely deleting my macports installation (removed
the entire directory tree). I reinstalled macports from scratch,
and reinstalled the xemacs package. I still have the same problem
with xemacs just hanging when started (and the terminal version
working fine).
When I run the dependency checks in /opt/local/lib and in /opt/
local/bin
I now get no results (before I reinstalled macports there were a
number of libraries).
Any other suggestions?
Thanks,
-Sam
William Davis wrote:
On May 17, 2009, at 1:53 PM, Jeremy Huddleston wrote:
On May 17, 2009, at 10:41, Samuel Isaacson wrote:
Hi,
I recently updated to 10.5.7 and then upgraded Xquartz to
2.3.3. Since the upgrade I have been unable to start xemacs.
More specifically, when starting xemacs from a terminal the
program simply hangs and no graphical window appears.
Everything worked fine prior to this upgrade, and moreover,
xemacs is able to start fine when I run it in terminal mode
"xemacs -nw".
I have installed version 21.4 patch 21 from macports.
xemacs in MacPorts does not link against anything in XQuartz.
The only possible issue would be a server connection, but if you
can open xterm, that's not the case.
I suspect there is some kind of xserver interaction going on,
but am not sure how to proceed. Does anyone have any suggestions?
Make sure you 'sudo port -v upgrade outdated'
Also verify your MP is linked correctly against MP libs and not /
usr/X11 libs. These should output nothing:
cd /opt/local/lib
for f in *dylib; do otool -L $f | grep -q /usr/X11 && echo $f;
done
cd /opt/local/bin
for f in *; do otool -L $f | grep -q /usr/X11 && echo $f; done
_______________________________________________
Do not post admin requests to the list. They will be ignored.
X11-users mailing list (email@hidden)
This email sent to email@hidden
I had the same problem (with an error mesg about something
unresoved). After doing
sudo port -dfun upgrade xmacs
xmacs would start. However when running Jerremy=s tests I get:
macintosh:~ frstan$ cd /opt/local/lib
macintosh:lib frstan$ for f in *dylib; do otool -L $f | grep -q /
usr/X11 && echo $f; done
libgtkhex.0.0.0.dylib
libgtkhex.0.dylib
libgtkhex.dylib
libgtksourceview-1.0.0.0.0.dylib
libgtksourceview-1.0.0.dylib
libgtksourceview-1.0.dylib
macintosh:lib frstan$ cd /opt/local/bin
macintosh:bin frstan$ for f in *; do otool -L $f | grep -q /usr/
X11 && echo $f; done
otool: can't map file: _kgpgconf.app (Invalid argument)
otool: can't map file: _kleopatra_mainwindow.app (Invalid argument)
otool: can't map file: akonamail_bin.app (Invalid argument)
otool: can't map file: akregator.app (Invalid argument)
avahi-discover-standalone
otool: can't map file: blinken.app (Invalid argument)
bluefish
otool: can't map file: bovogui.app (Invalid argument)
boyclock
daemonclock
otool: can't map file: dolphin.app (Invalid argument)
otool: can't map file: egroupwarewizard.app (Invalid argument)
eyeclock
ghex2
girlclock
gnome-keyring-manager
gnopernicus
otool: can't map file: groupwarewizard.app (Invalid argument)
otool: can't map file: groupwisewizard.app (Invalid argument)
otool: can't map file: gwenview.app (Invalid argument)
henohenoclock
otool: can't map file: kabcclient.app (Invalid argument)
otool: can't map file: kabceditor_bin.app (Invalid argument)
otool: can't map file: kabcviewer_bin.app (Invalid argument)
otool: can't map file: kaddressbook_bin.app (Invalid argument)
otool: can't map file: kalarm_bin.app (Invalid argument)
otool: can't map file: kalarmautostart.app (Invalid argument)
otool: can't map file: kalgebra.app (Invalid argument)
otool: can't map file: kalzium.app (Invalid argument)
otool: can't map file: kanagram.app (Invalid argument)
otool: can't map file: kappfinder.app (Invalid argument)
otool: can't map file: kapptemplate.app (Invalid argument)
otool: can't map file: katomic.app (Invalid argument)
otool: can't map file: kbattleship.app (Invalid argument)
otool: can't map file: kblackbox.app (Invalid argument)
otool: can't map file: kblocks.app (Invalid argument)
otool: can't map file: kbounce.app (Invalid argument)
otool: can't map file: kbreakout.app (Invalid argument)
otool: can't map file: kbruch.app (Invalid argument)
otool: can't map file: kbugbuster.app (Invalid argument)
otool: can't map file: kcalc.app (Invalid argument)
otool: can't map file: kdiamond.app (Invalid argument)
otool: can't map file: kfmclient.app (Invalid argument)
otool: can't map file: kgeography.app (Invalid argument)
otool: can't map file: kget.app (Invalid argument)
otool: can't map file: kgoldrunner.app (Invalid argument)
otool: can't map file: khangman.app (Invalid argument)
otool: can't map file: khelpcenter.app (Invalid argument)
otool: can't map file: kig.app (Invalid argument)
otool: can't map file: kiriki.app (Invalid argument)
otool: can't map file: kiten_bin.app (Invalid argument)
otool: can't map file: kjumpingcube.app (Invalid argument)
otool: can't map file: klettres.app (Invalid argument)
otool: can't map file: klines.app (Invalid argument)
otool: can't map file: kmahjongg.app (Invalid argument)
otool: can't map file: kmail.app (Invalid argument)
otool: can't map file: kmines.app (Invalid argument)
otool: can't map file: kmplot.app (Invalid argument)
otool: can't map file: knetwalk.app (Invalid argument)
otool: can't map file: knode.app (Invalid argument)
otool: can't map file: knotes.app (Invalid argument)
otool: can't map file: kolabwizard.app (Invalid argument)
otool: can't map file: kolf.app (Invalid argument)
otool: can't map file: kollision.app (Invalid argument)
otool: can't map file: kompare.app (Invalid argument)
otool: can't map file: konqueror.app (Invalid argument)
otool: can't map file: konquest.app (Invalid argument)
otool: can't map file: konsolekalendar.app (Invalid argument)
otool: can't map file: kontact_bin.app (Invalid argument)
otool: can't map file: kopete.app (Invalid argument)
otool: can't map file: korganizer.app (Invalid argument)
otool: can't map file: kpat.app (Invalid argument)
otool: can't map file: kres-migrator_srcs.app (Invalid argument)
otool: can't map file: kreversi.app (Invalid argument)
otool: can't map file: kruler.app (Invalid argument)
otool: can't map file: ksame.app (Invalid argument)
otool: can't map file: kshisen.app (Invalid argument)
otool: can't map file: kspaceduel.app (Invalid argument)
otool: can't map file: ksquares.app (Invalid argument)
otool: can't map file: kstars.app (Invalid argument)
otool: can't map file: ksudoku.app (Invalid argument)
otool: can't map file: kteatime.app (Invalid argument)
otool: can't map file: lskat.app (Invalid argument)
margueriteclock
octopusclock
otool: can't map file: okular.app (Invalid argument)
otool: can't map file: parley.app (Invalid argument)
penguinclock
punpunclock
otool: can't open file: python-config2.5 (No such file or
directory)
otool: can't map file: radselect_bin.app (Invalid argument)
otool: can't map file: scalixadmin.app (Invalid argument)
otool: can't map file: scalixwizard.app (Invalid argument)
silicagelclock
otool: can't map file: sloxwizard.app (Invalid argument)
srcore
taroclock
otool: can't map file: umbrello.app (Invalid argument)
umeharaclock
otool: can't open file: vtk (No such file or directory)
otool: can't open file: vtkpython (No such file or directory)
xscreensaver
xscreensaver-demo
xscreensaver-gl-helper
xsnow
macintosh:bin frstan$
William Davis
frstanATbellsouthDOTnet
Mac OS X.5.7 Darwin 9.7.0
XQuartz 2.3.3 (xorg-server 1.4.2-apple42)
Mac Mini Intel Duo @ 1.86 GHz
Mundus vult decepi, ego non
_______________________________________________
Do not post admin requests to the list. They will be ignored.
X11-users mailing list (email@hidden)
This email sent to email@hidden
<xemacs_sample.txt> _______________________________________________
Do not post admin requests to the list. They will be ignored.
X11-users mailing list (email@hidden)
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
X11-users mailing list (email@hidden)
This email sent to email@hidden