Re: Creating segues
Re: Creating segues
- Subject: Re: Creating segues
- From: Carl Hoefs <email@hidden>
- Date: Mon, 14 Sep 2015 15:02:10 -0700
No, the situation is the same with or without an embedding nav controller.
1. I make a new single-view iOS app.
2. I embed that view in a nav controller
3. I drag another view controller onto the storyboard
4. I try to control drag between the initial VC and the new one. No go.
5. Xcode doesn't allow me to create *any* segues except from the root nav controller.
What gives?
-Carl
> On Sep 14, 2015, at 2:56 PM, Alex Zavatone <email@hidden> wrote:
>
> Well, there has to be one backing them all which it sound like you have done.
>
> Have you tried control dragging from one scene's view to the top level of the view controller you want the segue to go to?
>
> I admit it can be a clunky and frustrating experience knowing where to drag to and how.
>
> Sent from my iPhone
>
>> On Sep 14, 2015, at 5:53 PM, Carl Hoefs <email@hidden> wrote:
>>
>> Did that, no effect. Are you saying that *all* view controllers must be embedded in a nav controller? Surely not, as I can get away without it for a single level of sub view controllers.
>>
>> -Carl
>>
>>
>>> On Sep 14, 2015, at 2:45 PM, Alex Zavatone <email@hidden> wrote:
>>>
>>> I'm assuming iOS here.
>>>
>>> Have you done the little "select your first screen and then select Embed in > Navigation Controller" from the Editor menu in the storyboard?
>>>
>>> Until you've done it a few times, it's real easy to miss.
>>>
>>> Until you've done that, the IB won't let you drag segues and sadly, it won't tell you that you need to do that.
>>>
>>> Hope that's it.
>>>
>>> Alex Zavatone
>>>
>>>> On Sep 14, 2015, at 5:38 PM, Carl Hoefs wrote:
>>>>
>>>> Xcode 6.4
>>>>
>>>> How does one create a segue from a non-initial view controller to another view controller?
>>>>
>>>> I have an InitialVC:UIViewController and I can connect any number of other VC's to it with control drag:
>>>>
>>>> InitialVC
>>>> / \
>>>> A_VC B_VC . . .
>>>>
>>>> I've assigned an identifier to each of the segues and can invoke them to bring up A_VC or B_VC at runtime with -performSegueWithIdentifier:. So far so good. But now I need to have segues going from A_VC to C_VC, D_VC, etc:
>>>>
>>>> InitialVC
>>>> / \
>>>> A_VC B_VC . . .
>>>> / \
>>>> C_VC D_VC
>>>>
>>>> Xcode refuses to allow me to connect A_VC to C_VC or D_VC with control-drag. The blue line just vanishes. It doesn't matter what type of segue goes from InitialVC to A_VC (push, replace, modal, etc).
>>>>
>>>> I must be missing something real obvious here.
>>>> -Carl
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Do not post admin requests to the list. They will be ignored.
>>>> Xcode-users mailing list (email@hidden)
>>>> Help/Unsubscribe/Update your Subscription:
>>>>
>>>> This email sent to email@hidden
>>
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Xcode-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden