Re: Apple system profiler
Re: Apple system profiler
- Subject: Re: Apple system profiler
- From: Jonathan Neff <email@hidden>
- Date: Wed, 8 Nov 2000 16:09:45 -0500 (EST)
I tried this again after pulling out all of my scripting additions except
for Standard Additions and didn't have any problems. I'm using OS 9.0.4,
ASP version 2.4.4, and Applescript 1.4.3.
If you are using the same setup (software versions), try pulling out some
or all of your scripting additions (except for standard additions) to see
if one of the others is causing a language conflict.
Hope this helps,
jonathan
On Tue, 7 Nov 2000, Mike Tuller wrote:
>
With this script, I get the same error as I did when trying my own. Expected
>
end of line, etc. but found identifier.
>
>
Any ideas as to what that means?
>
>
> From: Jonathan Neff <email@hidden>
>
> Reply-To: Jonathan Neff <email@hidden>
>
> Date: Tue, 7 Nov 2000 12:05:34 -0500 (EST)
>
> To: Mike Tuller <email@hidden>
>
> Cc: email@hidden
>
> Subject: Re: Apple system profiler
>
>
>
> tell application "HardDisk:Desktop Folder:Apple System Profiler"
>
> make new report at beginning
>
> repeat until gathering is false
>
> end repeat
>
> set macOSInfo to MacOS info
>
> set memoryInfo to memory info
>
> set ethernetinfo to network info
>
> set productionInfo to production info
>
> set hardwareInfo to hardware info
>
>
>
> set finderVersion to finder version of macOSInfo
>
> set systemVersion to system version of macOSInfo
>
> set quicktimeVersion to QuickTime version of macOSInfo
>
>
>
> set videoMemorySize to video memory size of memoryInfo
>
> set VMInfo to VM info of memoryInfo
>
> set VMSize to VM size of memoryInfo
>
> set physicalRAM to physical RAM size of memoryInfo
>
> set diskCache to memory cache size of memoryInfo
>
>
>
> set logicBdNum to logicboard num of hardwareInfo
>
> set ratedSpeed to rated speed of hardwareInfo
>
> set modelName to model name of hardwareInfo
>
> set keyboardType to keyboard type of hardwareInfo
>
> set processorType to processor type of hardwareInfo
>
> set processorsLocal to processors of hardwareInfo
>
>
>
>
>
> set ethernetSpeed to Ethernet speed of ethernetinfo
>
> set ethernetDuplex to Ethernet duplex of ethernetinfo
>
> set appletalkZone to default AppleTalk zone of ethernetinfo
>
> set networkPorts to active network ports of ethernetinfo
>
> set appletalkNetwork to AppleTalk network of ethernetinfo
>
> set appletalkNode to AppleTalk node of ethernetinfo
>
> set appletalkAddress to AppleTalk address of ethernetinfo
>
> set appletalkRouter to AppleTalk router of ethernetinfo
>
> set TCPIPnetmask to TCPIP netmask of ethernetinfo
>
> set TCPIPaddress to TCPIP address of ethernetinfo
>
> set TCPIPgateway to TCPIP gateway of ethernetinfo
>
> set TCPIPdomain to TCPIP domain of ethernetinfo
>
> set TCPIPnameserver to TCPIP nameserver of ethernetinfo
>
>
>
> set romRevision to ROM revision of productionInfo
>
> set bootROM to boot ROM version of productionInfo
>
> set bootROMfile to boot ROM file version of productionInfo
>
> set serialNumber to serial number of productionInfo
>
> activate
>
> quit
>
> end tell
>
>
>
> set fileRef to open for access file "HardDisk:Desktop
>
> Folder:gestaltoutput.txt" with write permission
>
>
>
> try
>
> writeData("Finder version:", finderVersion, fileRef)
>
> writeData("System version:", systemVersion, fileRef)
>
> writeData("Quicktime version:", quicktimeVersion, fileRef)
>
>
>
> writeData("Video Memory size:", videoMemorySize, fileRef)
>
> writeData("Virtual Memory status:", VMInfo, fileRef)
>
> writeData("Virtual Memory size:", VMSize, fileRef)
>
> writeData("Physical RAM:", physicalRAM, fileRef)
>
> writeData("Disk Cache:", diskCache, fileRef)
>
>
>
> writeData("Logic Board number:", logicBdNum, fileRef)
>
> writeData("Processor speed:", ratedSpeed, fileRef)
>
> writeData("Model Name:", modelName, fileRef)
>
> writeData("Keyboard Type:", keyboardType, fileRef)
>
> writeData("Processor Type:", processorType, fileRef)
>
> writeData("Number of Processors:", processorsLocal, fileRef)
>
>
>
> writeData("Ethernet Speed:", ethernetSpeed, fileRef)
>
> writeData("Ethernet Duplex:", ethernetDuplex, fileRef)
>
> writeData("AppleTalk zone:", appletalkZone, fileRef)
>
> writeData("Network Port:", networkPorts, fileRef)
>
> writeData("AppleTalk Network:", appletalkNetwork, fileRef)
>
> writeData("AppleTalk Node:", appletalkNode, fileRef)
>
> writeData("AppleTalk Address:", appletalkAddress, fileRef)
>
> writeData("AppleTalk Router:", appletalkRouter, fileRef)
>
> writeData("TCPIP Netmask:", TCPIPnetmask, fileRef)
>
> writeData("TCPIP Address:", TCPIPaddress, fileRef)
>
> writeData("TCPIP Gateway:", TCPIPgateway, fileRef)
>
> writeData("TCPIP Domain:", TCPIPdomain, fileRef)
>
> writeData("TCPIP Nameserver:", TCPIPnameserver, fileRef)
>
>
>
> writeData("ROM Revision:", romRevision, fileRef)
>
> writeData("Boot ROM:", bootROM, fileRef)
>
> writeData("Boot ROM File:", bootROMfile, fileRef)
>
> writeData("Serial Number:", serialNumber, fileRef)
>
>
>
> close access fileRef
>
> on error
>
> close access fileRef
>
> end try
>
>
>
> on writeData(desc, value, fileLocation)
>
> try
>
> write desc & tab & tab & tab & value & return to fileLocation
>
> on error
>
> display dialog "oops"
>
> end try
>
> end writeData
>
>
***********
Jonathan Neff
Student Technology Centers
Indiana University - Bloomington
email@hidden