Re: Cannot pair to our accessory from Ipad
Re: Cannot pair to our accessory from Ipad
- Subject: Re: Cannot pair to our accessory from Ipad
- From: Joakim Linde <email@hidden>
- Date: Tue, 26 Jun 2012 00:32:11 -0700
Paul,
You might want to check the Apple Bluetooth Guidelines and make sure your device follows them.
https://developer.apple.com/hardwaredrivers/BluetoothDesignGuidelines.pdf
Thanks,
Joakim
On Jun 25, 2012, at 2:52 PM, Paul Stuart <email@hidden> wrote:
> Hello,
> We are part of the MFI program working on a linux-based imaging accessory. Running the bluez stack on the linux side, I am able to initiate , and successfully pair with an Ipad. I can also pair both ways with an Android device with no issues.
>
> However, I am not able to successfully pair when I initiate the process from the Ipad: it fails with "Device is not supported" and I don't know why.
>
> Our device class is 'Imaging, camera' and we advertise the 'Wireless iAP' service. Any suggestions or insight much appreciated.
>
> This is a dump of my hciconfig
>
> hci0: Type: BR/EDR Bus: UART
> BD Address: 00:18:34:26:4E:40 ACL MTU: 1021:4 SCO MTU: 180:4
> UP RUNNING PSCAN ISCAN
> RX bytes:1130 acl:5 sco:0 events:58 errors:0
> TX bytes:1091 acl:5 sco:0 commands:40 errors:0
> Features: 0xff 0xff 0x2d 0xfe 0x9b 0xff 0x79 0x83
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'dm365-evm-0'
>
> Class: 0x080620
>
> Service Classes: Capturing
> Device Class: Imaging, Camera
> HCI Version: 2.1 (0x4) Revision: 0x0
> LMP Version: 2.1 (0x4) Subversion: 0x1d1f
> Manufacturer: Texas Instruments Inc. (13)
>
> This is a dump from sdptool browse of our accessory bluetooth from my PC
>
> Browsing 00:18:34:26:4E:40 ...
> Service Name: Wireless iAP
> Service Description: iAP over RFCOMM
> Service Provider: Company Inc
> Service RecHandle: 0x10000
> Service Class ID List:
> UUID 128: 00000000-deca-fade-deca-deafdecacafe
> Protocol Descriptor List:
> "L2CAP" (0x0100)
> "RFCOMM" (0x0003)
> Channel: 1
> Language Base Attr List:
> code_ISO639: 0x656e
> encoding: 0x6a
> base_offset: 0x100
> Profile Descriptor List:
> "Serial Port" (0x1101)
> Version: 0x0100
>
>
> thanks,
> Paul
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Bluetooth-dev mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden