RE: Cannot pair to our accessory from Ipad
RE: Cannot pair to our accessory from Ipad
- Subject: RE: Cannot pair to our accessory from Ipad
- From: Ephram Cohen <email@hidden>
- Date: Tue, 26 Jun 2012 13:46:15 -0700
Paul,
If the message you are getting is the message I think it is... It means
that Authentication was attempted and failed three times in a row. This is
strictly an MFI issue. Something is wrong with your authentication process.
I hope that I can say that here without getting into trouble.
Ephram
> -----Original Message-----
> From: bluetooth-dev-bounces+ecohen=email@hidden
> [mailto:bluetooth-dev-bounces+ecohen=email@hidden] On
> Behalf Of Joakim Linde
> Sent: Tuesday, June 26, 2012 12:32 AM
> To: Paul Stuart
> Cc: email@hidden
> Subject: Re: Cannot pair to our accessory from Ipad
>
>
> Paul,
>
> You might want to check the Apple Bluetooth Guidelines and make sure
> your device follows them.
>
> https://developer.apple.com/hardwaredrivers/BluetoothDesignGuidelines.p
> df
>
> Thanks,
> Joakim
>
> On Jun 25, 2012, at 2:52 PM, Paul Stuart <email@hidden>
> wrote:
>
> > Hello,
> > We are part of the MFI program working on a linux-based imaging
> accessory. Running the bluez stack on the linux side, I am able to
> initiate , and successfully pair with an Ipad. I can also pair both
> ways with an Android device with no issues.
> >
> > However, I am not able to successfully pair when I initiate the
> process from the Ipad: it fails with "Device is not supported" and I
> don't know why.
> >
> > Our device class is 'Imaging, camera' and we advertise the 'Wireless
> iAP' service. Any suggestions or insight much appreciated.
> >
> > This is a dump of my hciconfig
> >
> > hci0: Type: BR/EDR Bus: UART
> > BD Address: 00:18:34:26:4E:40 ACL MTU: 1021:4 SCO MTU: 180:4
> > UP RUNNING PSCAN ISCAN
> > RX bytes:1130 acl:5 sco:0 events:58 errors:0
> > TX bytes:1091 acl:5 sco:0 commands:40 errors:0
> > Features: 0xff 0xff 0x2d 0xfe 0x9b 0xff 0x79 0x83
> > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> > Link policy: RSWITCH HOLD SNIFF PARK
> > Link mode: SLAVE ACCEPT
> > Name: 'dm365-evm-0'
> >
> > Class: 0x080620
> >
> > Service Classes: Capturing
> > Device Class: Imaging, Camera
> > HCI Version: 2.1 (0x4) Revision: 0x0
> > LMP Version: 2.1 (0x4) Subversion: 0x1d1f
> > Manufacturer: Texas Instruments Inc. (13)
> >
> > This is a dump from sdptool browse of our accessory bluetooth from my
> PC
> >
> > Browsing 00:18:34:26:4E:40 ...
> > Service Name: Wireless iAP
> > Service Description: iAP over RFCOMM
> > Service Provider: Company Inc
> > Service RecHandle: 0x10000
> > Service Class ID List:
> > UUID 128: 00000000-deca-fade-deca-deafdecacafe
> > Protocol Descriptor List:
> > "L2CAP" (0x0100)
> > "RFCOMM" (0x0003)
> > Channel: 1
> > Language Base Attr List:
> > code_ISO639: 0x656e
> > encoding: 0x6a
> > base_offset: 0x100
> > Profile Descriptor List:
> > "Serial Port" (0x1101)
> > Version: 0x0100
> >
> >
> > thanks,
> > Paul
>
>
> _______________________________________________
> Do not post admin requests to the list. They will be ignored.
> Bluetooth-dev mailing list (email@hidden)
> Help/Unsubscribe/Update your Subscription:
> dev/email@hidden
>
> This email sent to email@hidden
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2180 / Virus Database: 2437/5094 - Release Date:
> 06/26/12
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Bluetooth-dev mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden