RE: MACH 1 Rip Profile Compatibility
RE: MACH 1 Rip Profile Compatibility
- Subject: RE: MACH 1 Rip Profile Compatibility
- From: "Niall Coady" <email@hidden>
- Date: Mon, 4 Dec 2000 10:18:19 -0000
Jack Clarke Wrote: "My question is, will the Mach 1 RIP work with output
profiles created with
non-Praxisoft profiling packages?"
Absolutely!, By virtue of the fact that the system is ICC compliant. ICC
Was set up to provide cross compatibility of Colour profiles between all
applications that subscribe to the common standard.
See: www.iccabc.com or www.profilecity.com to have all your ICC questions
answered.
Please also note that Praxisofts NEW Compass Profiler will offer superior
Ink Jet profiling through the use of a +1000 patch Linearisation target +
over 1500 patches to create the actual profile. The system will offer UCA
as well as the ability to profile a TD of less than 180: REMEMBER THAT
LOVELY PIGMENTED/DYE based INK for the EPSON 7500 and 9500! They will be
able to profile them! SUCESSFULLY!
Regards,
Niall Coady
Technical Director
Correct Colour Limited
"All your Colour Matching needs from one very informed source"
13 - 15 Delacourt Road
Blackheath
London
SE3 8XA
Tel: +44-(0)7740-940459
E-mail: mailto: email@hidden
Correct Colour means Colour Matching Solutions!
Niall Coady
Technical Director
Correct Colour Limited
"All your Colour Matching needs from one very informed source"
13 - 15 Delacourt Road
Blackheath
London
SE3 8XA
Tel: +44-(0)7740-940459
E-mail: mailto: email@hidden
Correct Colour means Colour Matching Solutions!