Re: Fighting Colorsync Monitors
Re: Fighting Colorsync Monitors
- Subject: Re: Fighting Colorsync Monitors
- From: Richard Millott <email@hidden>
- Date: Wed, 13 Dec 2000 14:56:55 +1100
At 21:22 12/12/2000 -0500, Glenn wrote:
>
> >Method 1: Disabling the extension that handles Apples calibration--I
>
>>believe it's called something like "Applevision."
>
>
>
>Disable Adobe Gamma and Apple's Default Calibrator, but don't disable
>
>the AppleVision extension. The AppleVision extension is integral to
>
>your monitor.
>
>
I don't see why disabling the Applevision extension should be a
>
problem. All the controls are then accessible on the front of the
>
monitor, and it's just like any other monitor--basically stripped of
>
it's Colorsync status. It seems to me this is really the correct
>
solution.
The problem I experienced with the Applevision extension being disabled
wasn't, so much, that you could not use the external controls, but more
when the brightness or contrast controls were adjusted. You can see
the condition of the monitor change, but there is no visual reference
displayed, showing at what point on the scale of 0 to 100 you are at
with either of these controls. It's a bit like flying blind.
Regards
Richard