Re: Polaroid SprintScan 4000-2
Re: Polaroid SprintScan 4000-2
- Subject: Re: Polaroid SprintScan 4000-2
- From: neil snape <email@hidden>
- Date: Thu, 02 Nov 2000 18:00:20 +0100
on 2/11/2000 16:43, Mark Winchester at email@hidden wrote:
>
I finally was able to talk to Polaroid Tech Support and they say that there
>
is no internal auto correction/calibration going on. The key would be to
>
turn it off in the software (the auto density compensation, etc.) We will
>
create an action that converts the scan to the working space.
>
>
Mark
I'm not sure if this is a incorrect response but here goes; if your
SERIOUSLY trying to get something out of this scanner you'll have to buy
Silverfast to drive it. Then you can implement ICC control and extract the
maximum from the scanner. They offer free demo's from their site.