Re: Loading profiles into Fiery RIP
Re: Loading profiles into Fiery RIP
- Subject: Re: Loading profiles into Fiery RIP
- From: Dan Caldwell <email@hidden>
- Date: Tue, 21 Nov 2000 13:13:27 -0800
Will the Fiery RIP take accept custom source and destination
profiles? I talked to Epson support and finally got to someone who
had an idea what I was talking about. He said that theoretically
profiles could be loaded but Epson doesn't support it. Has anyone
done this? If it can't be done this might be reason enough to not
use this RIP.
I spent a great deal of time with a Fiery RIP on a Minolta printer
last week. We made a profile at ProfileCity and tested it using P to
P in Photoshop with good results. We then put it into the RIP using
Fiery's color tools. When we selected the profile in the RIP the
results were much different (unacceptable) then the P to P results.
The problem was there was no way to build the profile with out
calling on a profile in the Fiery. This made the new profile
dependent on the one that was selected when it was built. As you can
not (and should not) add two profiles, and there is no way to print
raw it makes the fact that you can download a profile an un-useable
feature.
Dan
--
****************************
http://www.profilecity.com
Dan Caldwell
ProfileCity Manager
ProfileCity.com LLC
E-mail email@hidden
Your Key to Great Color!
****************************