Re: Pre-Calibration of Monitor Hardware (Gain & Bias)
Re: Pre-Calibration of Monitor Hardware (Gain & Bias)
- Subject: Re: Pre-Calibration of Monitor Hardware (Gain & Bias)
- From: neil snape <email@hidden>
- Date: Fri, 08 Jun 2001 07:47:30 +0200
on 7/06/01 21:21, Josef Fallnhauser at email@hidden wrote:
ColorBlind Prove it!
>
At the beginning of a calibration, you are always pleased to check the
>
Monitors Hardware White Point. But who tells, that the gain and bias
>
settings are correct?
This only tells the profiling application which white point to set. When
you continue there is a measure white point where you put the colorimeter
and adjust the guns by hand until the white point is as close as possible to
the desired white point. The better the screen is calibrated at the
beginning the less the profile will be twisted to bring the colours back to
a standard.
Neil Snape email@hidden
http://mapage.noos.fr/nsnape