Re: custom profiles for Epson 3000
Re: custom profiles for Epson 3000
- Subject: Re: custom profiles for Epson 3000
- From: email@hidden
- Date: Thu, 15 Mar 2001 21:40:52 EST
In a message dated 3/15/01 5:28:42 PM, email@hidden writes:
>
So let me see if I've got this; ProfilerPro will make the printer RGB
>
profiles, and ProfilerRGB will make the scanner transparency profiles.
>
Who makes these two software packages?
>
>
Monaco EZ will do both, but don't I need a flatbed to read the targets
>
for the printer profiles? Or could I use the spectrophotometer for the
>
printer targets as well?
No, this is thoroughly boggled; probably my fault. ProfilerPRO makes both RGB
and CMYK output profiles using your DPT41. ProfilerRGB and EZ Color are
programs a DTP41 owner would not be likely to buy, as they use a scanner to
measure patches, which is less accurate than using your spectrophotometer.
Scanner profiling does not require a spectro (except perhaps to make your own
custom data file) and can be done with a seperate program.
C. David Tobie
Design Cooperative
email@hidden