Re: LinoColor
Re: LinoColor
- Subject: Re: LinoColor
- From: Stefan Zrenner <email@hidden>
- Date: Mon, 21 May 2001 08:28:51 +0200
Yes, thanks I found this option to make the scans but there are a few
setting regarding the white point which can be adjusted for the calibration
scan, which setting are the best ?
Stefan
>
Message: 6
>
Date: Sun, 20 May 2001 06:38:30 -0600
>
Subject: Re: LinoColor
>
From: Andrew Rodney <email@hidden>
>
To: Stefan Zrenner <email@hidden>,
>
<email@hidden>
>
>
on 5/20/01 5:47 AM, Stefan Zrenner at email@hidden wrote:
>
>
> I have a Tango Scanner here and would like to ask which settings should be
>
> made on LinoColor v6 to make a good IT8 scan to build a profile via
>
> ColorBlind ?
>
>
Pick the "Scan as calibration" option. That's the key in getting the "raw"
>
data out of LinoColor necessary to produce a profile.
>
>
Andrew
--
====================================================================
TypeMaker Espaqa S.L. * P.O. Box 10 * 08339 Vilassar de Dalt * Spain
Voice: +34-93-7509715 * Fax: +34-93-7509830
mailto:email@hidden http://www.typemaker.es