Re: Fuji Profiles wanted
Re: Fuji Profiles wanted
- Subject: Re: Fuji Profiles wanted
- From: neil snape <email@hidden>
- Date: Sat, 22 Sep 2001 18:33:48 +0200
on 22/09/2001 17:51, Andrew Rodney at email@hidden wrote:
>
> point in Profile Editor from about 91% (as created) to 98%. We consistently
>
> seem to be
>
> getting runaway color saturation in the deeper skin tones.
>
>
3.X made good profiles but lots of people complained about the lack of
>
saturation in the finished profiles. If you are going to Seybold, you'll
>
likely hear and see some vast improvements from this company. So hold onto
>
those spectral data files!
Isn't the problem too much saturation but certain colours desaturating on
perceptual conversions? I agree that with the Fuji an image by image choice
of rendering intents helps to get the most from this printer. Fuji Picto
profiles created with PrintOpen behave in a similar fashion on perceptual ,
desaturating reds. Skins tones however are quite good especially if consider
gloss impact is used, and uv.
>
GretagMacbeth made a recommendation once that seemed odd but is certainly
>
worth a try; use the Saturation intent! One other thing I find is that I
>
usually prefer output with these profiles using a Relative Colorimetric
>
intent. However, it's an image by image situation. So use the Convert to
>
Profile command (since you need to anyway for the Fuji) and toggle different
>
intents and pick the one you like based on the soft proof you get.
The new driver accepts ICC profiles according to a Fuji press release.
Neil Snape email@hidden
http://mapage.noos.fr/nsnape