Re: The Vivid Setting
Re: The Vivid Setting
- Subject: Re: The Vivid Setting
- From: Jack Kelly Clark <email@hidden>
- Date: Mon, 1 Jul 2002 09:34:51 -0700
Joe Holmes wrote:
If you print out a target with it such as the LCH leaves target from
Candela, you will see that Vivid has a vicious stripe right up the
middle where the very near neutral colors are one lightness, and all
surrounding colors are much lighter. An extreme discontinuity in the
color space which was deliberately introduced to change the way
simple graphics print, and which cannot be removed by any profiling
method, short of reading many tens of thousands of patches.
This sounds like a useful test image. Just curious if this Candela
target is available to the colorgeek public?
If one uses a decent RIP and linearizes then profiles their Epson as
a cmyk device, might that improve the results on the above mentioned
Candela target?
Jack Clark
UC Davis
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.