Re: Spectrophotometer measurements
Re: Spectrophotometer measurements
- Subject: Re: Spectrophotometer measurements
- From: Roger Breton <email@hidden>
- Date: Wed, 10 Jul 2002 21:13:50 -0400
>
Thanks for the clarification. So if you want to compare Apples to apples for
>
FOGRA and SWOP conformance then you should measure the sheets with the black
>
table. Makes sense for sheets printed on both sides.
>
Do you know if the TR001 recommends measuring sheets with the black table?
>
--
>
Dan B. Reid
The TR-001 book says , on page 5:
"All measurements were made in accordance with the procedures of
CGATS.5-1993. That is, the measurement geometry was 45/0 or 0/45
and a black backing was used behind the sample."
There you have it.
Regards,
Roger Breton
Laval, Canada
email@hidden
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.