RE: ECI charts sharing X IT8
RE: ECI charts sharing X IT8
- Subject: RE: ECI charts sharing X IT8
- From: Ulf Grossmann <email@hidden>
- Date: Tue, 18 Feb 2003 10:30:52 +0100
Hi Adriano,
>
Both PM 4.11 and PO 4.05 has this charts to DTP41, but is
>
possible/advisable
>
to print the PM ECI2002 and read in PO and vice versa?
it isn't possible in the direct way, because PM don't
implement the CMYK Values of the chart into the measurements
and both headers are different. I for myself, change all
differences inside Excel and so I can measure with
measuretool of PM and calculate with PO, because I'm not able
to measure with the i1 from PO 4.0.5 and with 4.0.5.2 I can
measure only in single mode.
From PM to PO you have to create a new Text file with the PO
Header of the ECI2002 chart and the XYZ and CMYK values
inside > From PO to PM you have to change only the header. You can
use
the measurements as Reference and measurement file in PM.
>
I'm wondering too if this charts are a good choice to measure
>
Offset printers
>
(IT8 still better?), or would be preferable for inkjets only.
>
with the ECI2002 chart you have an improofment inside the
light area and your gray is much better. The most difference
you can see if you profile an Inkjet.
Best regards
Ulf Grossmann
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.