Re: to UV filter or not to UV filter...
Re: to UV filter or not to UV filter...
- Subject: Re: to UV filter or not to UV filter...
- From: german <email@hidden>
- Date: Wed, 26 Feb 2003 10:01:56 +0300
Hi, Neil and Andrew!
Thank you for answering. And one last question (I hope :).
If I have not UV-cut filter at all, and when I will do measure with PMP 4.1
(for building profile of my Epson 1290) and iOne Pro. I can check "Spectral"
box in MeasureTool (Instrument cofiguration) and "Correction
optical-brightener" in Profile Maker. Does it mean that will be enough for
correction the effects of brighteners in the paper or I have to get UV
filter?
Sorry for my english
German
Moscow, Russia
---------------
>
The update function is used to replace the channel curves of the profile in
>
question. If the original was made with a UV model, then the re-measured
>
chart to update the profile will also have to be used. You don't want to mix
>
instrument measurements between UV, or geometry differences.
>
>
Neil Snape
>
That leads me to believe you do NOT need to use UV for the post
>
linearization since it's an update to an existing profile. But I could be
>
way off.
>
>
Andrew Rodney
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.