RE: Custom Input profiling with ProfileMakerPro
RE: Custom Input profiling with ProfileMakerPro
- Subject: RE: Custom Input profiling with ProfileMakerPro
- From: "Broudy, David" <email@hidden>
- Date: Tue, 14 Jan 2003 10:33:27 -0600
>
-----Original Message-----
>
From: Roger Breton [mailto:email@hidden]
>
Sent: Tuesday, January 14, 2003 7:53 AM
>
To: Color List
>
Subject: Custom Input profiling with ProfileMakerPro
>
as long as the data are formatted correctly, you can use any measurement
file in PM Pro. I made one from measurements of a regular Colorchecker and
use that to make profiles for digicams. in a test vs. the DC the result from
the non-DC didn't seem to be much different than one made from a DC. it's
been awhile since I made that data file so I forget exactly how to format
it, but if you open up the reference for a supported target e.g. Q60 you can
get an idea of how it's supposed to be formatted. I used Excel to move
columns and stuff around then exported that as tab-delimited ASCII.
and I would imaging that the reason GretagMacbeth doesn't support the plain
Colorchecker in PM Pro is they want you to buy the much more expensive DC
flavor.
--
David Broudy
Jostens R&D
11300 Rupp Drive
Burnsville, MN 55337
952.882.3617
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.