Re: Re-i1 Display concerns.
Re: Re-i1 Display concerns.
- Subject: Re: Re-i1 Display concerns.
- From: <email@hidden>
- Date: Fri, 11 Jul 2003 10:29:12 +0200 (CEST)
>
> Michael Lithgow from Colourhead wrote...
>
I feel my tests have for the most part eliminated the colorimeter as the
>
cause of the problem despite my initial belief being that this was
>
probably the culprit. I still think I may have something with my
>
thoughts on the light being over restricted to the sensor and this may
>
well be why the colorimeter is so much slower than the spectro. The
>
jumpy pointers would also point to this and there is still the question
>
of the difference in requested RGB gun adjustment between spectro and
>
i1Display colorimeter. I did not realise until yesterday that the i1
>
Display colorimeter was supported in ProfileMaker, if I had known this I
>
would have tested this combination much earlier.
I just knew that finally we would be talking about the same thing. A
problem with the brithness readings, jumping pointers, and a device
disagreement about where to put the RGB guns. In particular, with the
guns, if one device leaves the three equal, and the second device tells
you that you have to increase the green considerably, it would be very
difficult (theoretically) to achieve the same results with the two. Glad
to ehar that you have been able to identify this as only a software
problem.
>
>
I received an e-mail off list that
>
suggested that Gretag are currently working on improvements for i1Match
>
and have a "fix" ...
I guess this means that I do not suffer from delusions. I guess the fix
will be localized - only for those afflicted parts of the globe. By the
way, do you calibrate TFT's?
Regards.
Darrian Young
MGV
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.