Re: Phaser 7700
Re: Phaser 7700
- Subject: Re: Phaser 7700
- From: Glenn Kowalski <email@hidden>
- Date: Fri, 28 Mar 2003 07:21:53 -0500
Angus Pady wrote:
If you do not do the calibration procedure, prior to profiling, you
have no way of returning
the printer to a baseline. After a toner change or a major humidity change
it is possible for these toner based printers to shift / lose their
gray balance.
Or you could re-profile every time it changes. . .
I realize that, but the inherent problem with Phasermatch is that you
cannot use a profile you created with a spectro. You have to use
their procedure which involves scanning the target in order to create
a proprietary file that the Phasermatch will accept. The success of
this is limited to the scanner's accuracy.
--
Glenn Kowalski
Macintosh Systems Consultant
MacLab; a Division of Studio 405, Inc.
http://www.studio405.com
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.