Re: Murky prints, suddenly, from my Epson 2100
Re: Murky prints, suddenly, from my Epson 2100
- Subject: Re: Murky prints, suddenly, from my Epson 2100
- From: Thomas Holm / Pixl <email@hidden>
- Date: Mon, 06 Oct 2003 08:39:00 +0200
Edmund Ronald wrote:
>
The results are dark, murky, nothing like the
>
PS preview. Can anyone tell me what is going on, and how I could get a
>
decent screen/print match again?
I suspect the Epson driver has been set up inappropriately. It should be set
to No Color adjustment, and left there and at the same resolution used to
print the patches. IN fact the entire Epson driver should be identical
between profiling (print patches) and printing at a later stage.
If you want to check difference between ink cartridges save your Eye One
Match measurements, and make a new measurement when you suspect something is
wrong. Download ProfileMaker Pro. Open measure tool, the compare function,
and compare the measurements here. It will tell you whether colors drift and
how much...
Best Regards
Thomas Holm / Pixl ApS
- Photographer & Colour Management Consultant
- Adobe Certified Training Provider in Photoshop.
- Apple Solutions Expert - Colour Management
- Imacon Authorized Scanner Training Facility
- Remote Profiling Service (Output ICC profiles)
- Seminars speaker and tutor on CM and Digital Imaging etc.
- Home Page: www.pixl.dk 7 Email: th[AT]pixl.dk
--
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.