Re: RIP software suggestions for desktop inkjets?
Re: RIP software suggestions for desktop inkjets?
- Subject: Re: RIP software suggestions for desktop inkjets?
- From: gariba <email@hidden>
- Date: Sat, 4 Dec 2004 10:54:15 -0200
to work with the 1270s, I would be using PressReady,no doubt...
gariba
On Dec 3, 2004, at 6:43 PM, John W Lund wrote:
Regarding this:
The profiles supplied are good in both cases but
will only get you to 85 percent matching.
-- Regarding the Adesso product at least, I would (respectfully)
disagree.
In my experience with v.2.0.3 and an Epson 1270, I found their Epson
Photo
Paper profile to be so far off that it was unusable.
I chose to work with the 1270 instead of the 1280 or 2200, because it
was
the only one where the supplied profiles were for Epson media, not
PerfectProof's. It's not possible to "roll your own" paper profiles,
you
must choose from the (rather limited) supply PerfectProof has created.
You
can "edit" a paper profile, confined to dot gain & gray balance
adjustments.
Also, it's my understanding that the standard Adesso product supports
only
one printer at a time. To add a new printer the user must delete the
former
one.
HTH,
John
On 12/3/04 12:04 PM, "email@hidden"
<email@hidden> wrote in part:
To get the best colour it is recommended to have a qualified installer
calibrate and create
profiles for the RIP. The profiles supplied are good in both cases but
will only get you to 85
percent matching. A custom setup can reach 90-95 with the right media.
Angus Pady
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
email@hidden
This email sent to email@hidden
Clinica Tratamento de Imagem,
Érico Veríssimo, 614, 301,
Porto Alegre, RS, Brasil.
90.180-160.
Fone: 3231 0216
Fax: 3219 7723
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden