Re: Eizo Issues
Re: Eizo Issues
- Subject: Re: Eizo Issues
- From: John Bonilla <email@hidden>
- Date: Mon, 13 Dec 2004 09:48:11 -0500
Kaz
Perhaps you can elaborate on the claim from the Eizo rep at Photo Expo, that
you can get the same performance/calibration out of the Flexscan (as in the
CG21) by using software from a third party to get the equivalent of 10 bit
calibration. The software I'm speaking of is not any of the shrink wrapped
EyeOne, Color Vision or RIP's on the market. I wasn't sure if this was a
canned profile that the third party company develops on a one off basis but
I sure would welcome a brief explanation and to identify who this vendor is.
Thanks in advance,
John
On 12/11/04 3:03 PM, "email@hidden"
<email@hidden> wrote:
> Send Colorsync-users mailing list submissions to
> email@hidden
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.apple.com/mailman/listinfo/colorsync-users
> or, via email, send a message with subject or body 'help' to
> email@hidden
>
> You can reach the person managing the list at
> email@hidden
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Colorsync-users digest..."
>
>
> Today's Topics:
>
> 1. Re: Eizo issues (Kaz Kajikawa)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 11 Dec 2004 11:39:19 -0800
> From: Kaz Kajikawa <email@hidden>
> Subject: Re: Eizo issues
> To: email@hidden
> Cc: email@hidden
> Message-ID: <email@hidden>
> Content-Type: text/plain; charset=us-ascii
>
> Please let me explain what the difference is between FlexScan L985EX and
> ColorEdge CG21. The particular features which the CG21 has while the
> L985EX doesn't are as following.
>
> - Factory Adjustment of Gamma
> Eizo, at its own factory in Japan, measures and adjusts all of 256 signal
> level per each RGB per each single unit for ColorEdge series by high-
> accuracy measurement tool. This production process makes each gamma value
> accurate and consistent. A certificate of the adjustment result comes with
> each ColorEdge in the box.
>
> - Hardware calibration Calibration System
> The ColorEdge comes with a calibration software ColorNavigator which was
> developed as to maximize synergy among the combination of dual-domain IPS
> panel, superior ASIC developed by Eizo. The ColorNavigator accesses to
> monitor's LUT and other circuitries directly through USB connection and
> changes the LUT properties and brightness for accurate color reproduction.
>
> With these 2 features, the ColorEdge monitors provides with very smooth
> gamma curve with no visible bandings. For more information, please take a
> look at our white paper.
> http://www.eizo.com/support/wp/pdf/wp_03-003.pdf
>
> Thank you for your attention.
> Kaz Kajikawa
> Product & Marketing Manager
> EIZO NANAO Technologies Inc.
>
> ------------------------------
> Date: Wed, 08 Dec 2004 16:30:19 +0000
> From: Michael Harvey <email@hidden>
> Subject: Re: Eizo issues
> To: amadou diallo <email@hidden>,
> <email@hidden>
> Message-ID: <BDDCDC9B.390A%email@hidden>
> Content-Type: text/plain; charset="US-ASCII"
>
> On 8/12/2004 2:35 pm, "amadou diallo" wrote:
>
>> One difference between the CG21 and Flexscan models is the less
> expensive
>> line uses an 8 bit LUT vs 10bits on the ColorEdge line
>
> This is not so.
>
> They both use a 10-bit lookup table.
>
> Regards,
>
> Michael
>
>
>
>
>
>
>
>
> ------------------------------
>
> _______________________________________________
> Colorsync-users mailing list
> email@hidden
> http://lists.apple.com/mailman/listinfo/colorsync-users
>
> End of Colorsync-users Digest, Vol 1, Issue 122
> ***********************************************
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden