Re: OS10.3.x which cannot remember last monitor profile
Re: OS10.3.x which cannot remember last monitor profile
- Subject: Re: OS10.3.x which cannot remember last monitor profile
- From: David Gaudet <email@hidden>
- Date: Thu, 29 Jan 2004 16:08:45 -0500
I, too, have been having this same problem using a G4 Powerbook with a
ViewSonic flat panel plugged into the DVI port. Although, unlike
others, I didn't have this problem under 10.2.8, AND I don't have the
problem if the monitor goes to sleep. I only have the problem if I plug
the screen in *after* the 'book has already been booted.
Interestingly, the problem persists even when I assign the "stock"
powerbook profile that came with the computer to the Viewsonic...
My profiles were made with PMP 4.1.5
-dave
On Jan 29, 2004, at 1:00 AM, email@hidden
wrote:
I have been having this same problem in Jaguar (10.2.8). If the
screensaver
kicks in I almost always have to go into System Preferences and
reselect the
current monitor profile. This happens most often with the primary CRT
(LaCie
22-III) but also with the NEC LCD I use for palettes. I hoped this was
the
answer, but checking both profiles with ColorThink shows no problems
with
the profiles. Profiles were made with basICColor Display/Eye One Pro.
Grateful for any ideas,
Mark
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.