Re: ARTISAN: Odd Behavior When Switching Resolutions
Re: ARTISAN: Odd Behavior When Switching Resolutions
- Subject: Re: ARTISAN: Odd Behavior When Switching Resolutions
- From: Andrew Rodney <email@hidden>
- Date: Thu, 01 Jul 2004 08:00:15 -0600
on 6/30/04 10:45 PM, Rick Gordon wrote:
>
However, if the Artisan application is open, even in the background (and I
>
often leave Artisan application open and hidden, so that it is available for
>
easy access), the monitor profile will be reassigned to whatever profile is
>
keyed to the new resolution and falls toward the top of the list
>
alphabetically ; i.e., the topmost choosable profile in the list.
You have to manually pick the colorspace that matches the resolution. The
reason is you could have 5 different settings all different resolutions
using different aim points (2.2 gamma, native gamma, 5000K, 6500K etc). The
software doesn't know which aim point you want but it does know that if you
switch from one that is calibrated for that behavior, it's no longer in that
state so it pops the "Uncalibrated" message on screen.
>
For example, say that I keep gamma 2.2 and gamma 1.8 variants of a D65 350-ACR
>
setup. I have the Artisan application open and hidden. My current resolution
>
is 1600x1200,85Hz and my selected profile is the 2.2 variant. I switch to
>
another resolution, and let's not even bother with what profile is selected by
>
the Artisan application. I then switch back to the former resolution, and lo
>
and behold -- the profile that is now selected is the 1.8 variant. Why?
I'll have to try this on my unit. I only work at one resolution and in fact
one color temp but different contrast ratio's.
Andrew Rodney
http://digitaldog.net/
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.