RE: ProfileMaker yellows turn green
RE: ProfileMaker yellows turn green
- Subject: RE: ProfileMaker yellows turn green
- From: Laura Rimbaud <email@hidden>
- Date: Fri, 7 May 2004 14:39:16 -0700 (PDT)
>
Which instrument are you using? I have seen this
show up with
>
instruments that don't filter UV. This is not the
brightener
>
problem which ProfileMaker will detect and
compensate for.
Steve,
Thanks for the pointer. We use an eye-one without UV
filter. Some papers come up with the "Correct for
optical brightener" box enabled. Is this something we
need to use a UV filter to work around? Looking at
Pictopia's Lightjet profile the embedded data says it
was measured with an ICColor whith 'Filter="No"'
Pictopia told me they had the profile built by a third
party and did not know anything about the
measurements. Everything about their profile
correlates with ours. Most colors are spot-on with the
exception of saturated yellows that turn green.
Do we need to get a UV filtered Eye-One to make good
profiles for contone printrs?
Thanks again,
Laura
Laura Rimbaud
LPR Design
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
http://hotjobs.sweepstakes.yahoo.com/careermakeover
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.