RE: ProfileMaker yellows turn green
RE: ProfileMaker yellows turn green
- Subject: RE: ProfileMaker yellows turn green
- From: Steve Upton <email@hidden>
- Date: Fri, 7 May 2004 15:09:51 -0700
At 2:39 PM -0700 5/7/04, Laura Rimbaud wrote:
>
> Which instrument are you using? I have seen this
>
show up with
>
> instruments that don't filter UV. This is not the
>
brightener
>
> problem which ProfileMaker will detect and
>
compensate for.
>
>
Thanks for the pointer. We use an eye-one without UV
>
filter. Some papers come up with the "Correct for
>
optical brightener" box enabled. Is this something we
>
need to use a UV filter to work around? Looking at
>
Pictopia's Lightjet profile the embedded data says it
>
was measured with an ICColor whith 'Filter="No"'
>
Pictopia told me they had the profile built by a third
>
party and did not know anything about the
>
measurements. Everything about their profile
>
correlates with ours. Most colors are spot-on with the
>
exception of saturated yellows that turn green.
>
>
Do we need to get a UV filtered Eye-One to make good
>
profiles for contone printrs?
>
Well, it's tough to say without trying.
Send us a target and I'll scan it for you to see.
Regards,
Steve
________________________________________________________________________
o Steve Upton CHROMiX www.chromix.com
o (hueman) 866.CHROMiX
o email@hidden 206.985.6837
o ColorGear ColorThink ColorValet ColorSmarts ProfileCentral
________________________________________________________________________
--
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.