Problems with a Xerox DC3535
Problems with a Xerox DC3535
- Subject: Problems with a Xerox DC3535
- From: Giovanni Pravadelli <email@hidden>
- Date: Wed, 23 Feb 2005 12:22:08 +0100
|
Hi to all, my name is
Giovanni and I've got a problem with a Xerox docucolor 3535, with a
Fiery EX3535 here in the office: we do
pre-press so we need it to be always accurate (also because we want to
made printings ISO certified), but we find it very difficult: for the
Iso certification infact we use the Techkon Spectrodens and we found
that placing the color strip to check on different places on the
sheet, the ∆E can change a lot, so that we have one of those strips
Iso, while all the others aren't right .
But that's not the only
thing: after finding a good calibration we can
only make about 50 prints, and after we've got to calibrate it again.
So we linearize the printer using a Efi ES 1000 (same as Gretag Eye
One), but after a while it's the same history again.
We changed the drum
cartridge hoping that it could change our
situation, but nothing. Xerox assistance told us that for both problems
it was the
position of the printer and something about the fact that there is too
much electrostatic charge in the air: as the space here in the office
isn't too much, if we change position of the printer, we should move
quite everything around, so I'd like to know if other people are facing
the same problem and if there are solutions.
Thanks, Giovanni
|
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden