MeasureTool Compare question
MeasureTool Compare question
- Subject: MeasureTool Compare question
- From: Matt Nelson <email@hidden>
- Date: Mon, 14 Mar 2005 09:01:56 -0600
I must really not be awake this morning, I'm apparently doing this
wrong. Is not one of things first things one should do after outputting a
test chart, measuring it, building a profile for the device, and then
outputting a corrected chart using the profile created,
is to first compare the uncalibrated output to a known reference, and then
to compare the corrected output to the known reference to see if the
profile worked? I can open the measured chart data in Compare, but which
file are you supposed to use as the reference? I did this before in
ProfileMaker 4's measure tool, but everytime I try to open the reference
text file for the chart, I'm told it "doesn't contain measurement data of
CIE type (error 20718)" so I'm obviously doing it wrong.
--
Matt Nelson, A+, Network +, MCP
Prepress Production Manager
Director of Technology Resources
Nelson Printing Company
Nelson Label Company
Jonesboro, Arkansas
email@hidden
http://www.nelsonprinting.com
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden