Re: ProfileMaker 5 won't read a strip
Re: ProfileMaker 5 won't read a strip
- Subject: Re: ProfileMaker 5 won't read a strip
- From: "Mike Eddington" <email@hidden>
- Date: Tue, 22 Mar 2005 12:30:04 -0500
- Thread-topic: Re: ProfileMaker 5 won't read a strip
<I'm trying to read an ECI2002a3 strip into PM 5, using
an eye-one as I have done many times before. However, it is REFUSING to accept
data on strip 6 and I don't know why. I've looked at it visually, no defects,
and colorwise to my eye looks the same as another target that I have already
read successfully. I've even pulled another sheet, same problem.>
Do you have your volume turned up? I often jump the
gun when measureing with the i1. Line up the ruler to the strip, put the i1 in
place, press the button and then wait for the tone before measureing (least
that’s how it is on a Mac using MeasureTool). Other than that, make sure
you’re on a level surface and that the aperture isn’t flopping
around when you scan.
mike
|
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden