Re: ProfileMaker 5 won't read a strip
Re: ProfileMaker 5 won't read a strip
- Subject: Re: ProfileMaker 5 won't read a strip
- From: John W Lund <email@hidden>
- Date: Tue, 22 Mar 2005 19:10:14 -0800
Matt,
In addition to the excellent advice you've gotten already, here's one other
thought:
If the error is confined to the 6th row, can you try switching from Strip to
Patch reading mode, then back to Strip With Gaps for Row 7 onward?
Not sure if this will get you past the troublesome row, but it might at
least provide a hint about what the problem is...
Good luck,
John
On 3/22/05 12:03 PM, "email@hidden"
<email@hidden> wrote:
> Message: 3
> Date: Tue, 22 Mar 2005 10:36:03 -0600
> From: Matt Nelson <email@hidden>
> Subject: ProfileMaker 5 won't read a strip
> To: email@hidden
> Message-ID:
> <email@hidden>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
>
>
>
> I'm trying to read an ECI2002a3 strip into PM 5, using an eye-one as I have
> done many times before. However, it is REFUSING to accept data on strip 6
> and I don't know why. I've looked at it visually, no defects, and
> colorwise to my eye looks the same as another target that I have already
> read successfully. I've even pulled another sheet, same problem.
>
> Any ideas?
>
>
> --
> Matt Nelson, A+, Network +, MCP
> Prepress Production Manager
> Director of Technology Resources
> Nelson Printing Company
> Nelson Label Company
> Jonesboro, Arkansas
> email@hidden
> http://www.nelsonprinting.com
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden