Eye -One Photo iDiagnosis help
Eye -One Photo iDiagnosis help
- Subject: Eye -One Photo iDiagnosis help
- From: m c <email@hidden>
- Date: Thu, 31 Mar 2005 18:21:38 +0200
Hello, I writing to ask some help about the Eye -One Photo. I was
using Mesure tool to read my target, after some mistakes reading the
TC9.18.RGB target.I don,t not still how to mesure a colorchart in
MesureTool. I try to read it again and I got this message from
Mesuretool "calibration failed. (Error 20310)", after that I went to
Eyone Mach and I could not to calibrate eye one for printer profiling.
I whent to i-share and "surpraise" I cand read color from the cart. I
had some problems before about the usb , So what is wrong?. Do you you
think that is a new problem from my usb, is device problem, a
configuration problem in Mesuretool?.
Any help will be appreciated
thanks in advance
manuel
iDiagnosis test
General Information
Date and Time: 31/03/2005 17:28:09
Application version: Version 2.0.0
Driver version: Version 3.0.0
Platform: Microsoft Windows
Device Information
Device type: Eye-One Pro (NO filter) [ Ambient Light Emission
Reflectance Reflectance Scan Flash ]
Serial number: 117889
Firmware version: 202
CPLD version: 2
Dark measurement count: 868
Lamp burning time: 812.874 seconds
Spot measurement count: 291
Scan measurement count: 0
Dongle Test
Module "Scanner" is licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Button Test
Button is working normally
Calibration
Emission calibration :Successful
Emission Test
Black measurement (X=0.201 Y=0.236 Z=0.276)
Gray measurement (X=28.581 Y=30.829 Z=34.626)
White measurement (X=79.057 Y=85.898 Z=91.902)
Red measurement (X=34.685 Y=18.536 Z=1.724)
Green measurement (X=29.070 Y=59.927 Z=9.788)
Blue measurement (X=15.367 Y=7.785 Z=81.197)
Emission Test: Pass
Dark Measurement
Dark measurement: Pass (-39.086)
Noise Measurement
Noise measurement: Pass (3.177)
Lamptest
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful
Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Pass (LOT=813.959 seconds CIT=0.01897 LIT=0.0191502)
Scanning calibration: Not successful
Are the measurement head and the white reference clean?
Is the Eye-One placed on the white reference?
Try the following steps and repeat the test
Close all other applications.
Disable the sleep mode.
Connect laptop to power.
Remove not used PCMCIA cards.
Connect the Eye-One directly to the USB root hub. Do not connect it to
the keyboard or a non powered USB hub.
*** FAIL ***
The iDiagnisis report this:
General Information
Date and Time: 31/03/2005 17:28:09
Application version: Version 2.0.0
Driver version: Version 3.0.0
Platform: Microsoft Windows
Device Information
Device type: Eye-One Pro (NO filter) [ Ambient Light Emission
Reflectance Reflectance Scan Flash ]
Serial number: 117889
Firmware version: 202
CPLD version: 2
Dark measurement count: 868
Lamp burning time: 812.874 seconds
Spot measurement count: 291
Scan measurement count: 0
Dongle Test
Module "Scanner" is licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Button Test
Button is working normally
Calibration
Emission calibration :Successful
Emission Test
Black measurement (X=0.201 Y=0.236 Z=0.276)
Gray measurement (X=28.581 Y=30.829 Z=34.626)
White measurement (X=79.057 Y=85.898 Z=91.902)
Red measurement (X=34.685 Y=18.536 Z=1.724)
Green measurement (X=29.070 Y=59.927 Z=9.788)
Blue measurement (X=15.367 Y=7.785 Z=81.197)
Emission Test: Pass
Dark Measurement
Dark measurement: Pass (-39.086)
Noise Measurement
Noise measurement: Pass (3.177)
Lamptest
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful
Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Pass (LOT=813.959 seconds CIT=0.01897 LIT=0.0191502)
Scanning calibration: Not successful
Are the measurement head and the white reference clean?
Is the Eye-One placed on the white reference?
Try the following steps and repeat the test
Close all other applications.
Disable the sleep mode.
Connect laptop to power.
Remove not used PCMCIA cards.
Connect the Eye-One directly to the USB root hub. Do not connect it to
the keyboard or a non powered USB hub.
*** FAIL ***
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden