Proofing Proof4Press - ISO Coated
Proofing Proof4Press - ISO Coated
- Subject: Proofing Proof4Press - ISO Coated
- From: email@hidden
- Date: Fri, 3 Mar 2006 17:29:51 EST
|
I have just installed 3 of the latest Epson 7800 - which are driven by the
Kodak matchprint rip ( although they were supposed to be the Creo Integras) We
are running the ISOCoated profile - but the proofs seem to have a yellow caste.
we are using Creo paper Lab 95 0 -3 , I have targets for the yellow ink of 90 -4
-95 with the actual being 89 - 7 -92 which is about DEltaE4 - although the other
colours are 3 or below. - do I have to accept this or should I have aserious
discussion with Kodak about it - the problem is I dont know whether the colour
is correct according to the ISOcoated profle ( we have calibrated our proofers
and they all give same result.
Today we were running print test against a very glossy Proof4press proof
and the grey patches loooked very warm - When we printed the test ( we print to
the ISO A Curve) we found the greys were in between the two,
Is this what we should expect with proof4press sheet.
Peter
|
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden