Re: Remote proofing
Re: Remote proofing
- Subject: Re: Remote proofing
- From: Jim Rich <email@hidden>
- Date: Thu, 04 May 2006 08:38:56 -0400
- Thread-topic: Remote proofing
Rick,
I have a little experience with mx3s.
One strategy is to do some testing back and fourth between sites with the
mx3 targets to see how far your instruments are out and if they can agree.
Then when you make your MX3 use the same instrument for all sites and then
use the remote instruments to update the MX3s.
In some cases you might have to buy new instruments to get better
inter-instrument agreement.
Also, I would suggest contacting GMG to get their input on how to handle
this.
Good Luck
Jim Rich
On 5/4/06 8:24 AM, "Rick" <email@hidden> wrote:
> Top of the morning to all my fellow color geeks!!
>
> We are about to install an Epson 9800 at one of our clients and are
> going to be powering it with our GMG server. My question is .... what
> are others using to have their GMG software recognize the strip reader
> at the remote sight? We will have an ICColor at this location and a
> concern has been expressed as to what we will need in order for this to
> be able to send the mx3 numbers over the internet to our server here.
> Anybody have any experience at this? Thanks in advance for your reply!!
>
>
> Rick Kortemeier
> Sr. Color Specialist
> Integra
> 616.459.4142 ext.1169
> email@hidden
>
> _______________________________________________
> Do not post admin requests to the list. They will be ignored.
> Colorsync-users mailing list (email@hidden)
> Help/Unsubscribe/Update your Subscription:
>
> This email sent to email@hidden
>
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden