Lists

Terms and Conditions
Lists hosted on this site
Email the Postmaster
Tips for posting to public mailing lists

Re: HP Z2100 dry times

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: HP Z2100 dry times

Subject: Re: HP Z2100 dry times
From: Thomas Holm/pixl <email@hidden>
Date: Fri, 20 Apr 2007 15:25:05 +0200


On 19/04/2007, at 19.04, Jim Rich wrote:

I am getting involved with profiling an HPz2100 and using the on board
spectro with the GMG rip.
In the HP/GMG process you can set up a time delay before the HP measures the color patches. So the printer prints the patches and then waits to pull the paper back into the printer where the measurements take place. After the measurements the print is cut.

So while you are waiting for the print to dry back you cant print anything.

true.

Does anyone have any guidelines for how long one should wait before
measuring the patches.

The default from GMG is 5 minutes and it works nicely in my experience...

Best Regards

Thomas Holm / Pixl Aps

- Colour Management Consultant
- Seminars speaker and tutor on CM and Digital Imaging etc.
- Apple Solutions Expert
- Member, ColorManagementGroup.com

- www.pixl.dk · email@hidden
--

_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list      (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden



References:  
  >HP Z2100 dry times (From: Jim Rich <email@hidden>)




Prev by Date:
Re: Black generation questions for large format inkjet

Next by Date:
Colour targets for profile making from Lightroom?

Previous by thread:
Re: HP Z2100 dry times

Next by thread:
Re: HP Z2100 dry times

Index(es):

Date
Thread