Re: Calibration Problems on new Xerox Phaser 7760s
Re: Calibration Problems on new Xerox Phaser 7760s
- Subject: Re: Calibration Problems on new Xerox Phaser 7760s
- From: Joseph Yates <email@hidden>
- Date: Fri, 08 Jun 2007 11:56:02 -1000
- Thread-topic: Calibration Problems on new Xerox Phaser 7760s
on 6/5/07 3:01 PM, Simon Prais at email@hidden wrote:
> Our experience is that following the same procedures that you mentioned on
> the 7700 and 7750 models we have always been able to control the colour
> reasonable accurately. We also have a few clients with the 7760 but only as
> individual units so we have not been in a position to notice anything
> strange between devices side by side. But with the 7750 we have customers
> with multiple units and have never noticed any problematic levels of colour
> variation after calibration and profiling.
Could you share how you determine this reasonable accuracy? Do you measure
against some standard like ISO?
>> However, I must say that we don't trust the calibration part without
>> re-profiling at the same time. So we always do both and upload a new device
>> link profile through PhaserMatch each time.
A couple of questions on this.
1. When you calibrate through PhaserMatch - first selecting the Printer
Name/Print Quality/Paper Type - do you print the swatches with the Print
driver setting for "Color Correction" set at "None" or with the custom
ColorTek device link profile created for that particular printer.
2. How often do you find you must redo the calibration & re-profiling &
uploading new Device Link profile through PhaserMatch? Weekly? Daily?
Hourly? ;-)
Joseph Yates | Vice-President | Pacifica Island Art, Inc.
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden