Xerox Phaser 7760 & iGen3
Xerox Phaser 7760 & iGen3
- Subject: Xerox Phaser 7760 & iGen3
- From: James Lukens-Gable <email@hidden>
- Date: Fri, 12 Oct 2007 09:35:32 -0400
- Thread-topic: Xerox Phaser 7760 & iGen3
I was hoping for some advice on our color management here at Penn State. In
advance, I am relatively new to color management, so I apologize for the
³newbie² questions.
We have installed an iGen 3 and Xerox is working with us to fine tuning
color output by adjusting the various input/output settings as well manually
adjusting curves at the RIP, particularly PMS colors, to closely match
offset work that is produced here as well.
We have a demo model of a Phaser 7760DN, and ideally would like this to
³closely match² the output of the iGen.
We have GM EyeOne to do color measurements and calibrations, as well as
EyeOne Match 3.6.1 software.
Looking over the literature from Xerox, it appears that we will need to
purchase the PhaserMatch software to generate the ICC profile for color
correction (generated by the PhaserMatch software from the ICC profile for
the 7760 and the ICC profile of the iGen I believe they refer to this as a
TekColor Correction) and then download this to the 7760. Is this the case?
I have lots of other questions regarding this scenario, and I¹d like to
start off on the right path.
Thank you.
-----------------
Jim Lukens-Gable
Art Director
Penn State Multimedia & Print Center
The Pennsylvania State University
102A Hostetter Building
University Park PA 16802-1002
814-865-6946
814-865-7544 MPC Main Office
814-863-6376 Fax
email@hidden
www.multimediaprint.psu.edu
"If the only tool you have is a hammer, you will see every problem as a
nail."
- Abraham Maslow
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden