Re: Xerox Phaser 7760 & iGen3
Re: Xerox Phaser 7760 & iGen3
- Subject: Re: Xerox Phaser 7760 & iGen3
- From: Jim Rich <email@hidden>
- Date: Fri, 12 Oct 2007 09:57:30 -0400
- Thread-topic: Xerox Phaser 7760 & iGen3
Jim,
I have found there to be three options for driving the igen. The ones I know
of is a Xerox appliation that the name escapes me right now, then there
is the Fiery , and the third is the Spire rip.
What is the front end application is driving your igen?
As for manually adjusting curves on the igen...my advice without knowing
your site details is to first profile the igen. Then pick a good target
profile such as Gracol or the new SWOP and use the target with your custom
output profile. And then if necessary you might have to tweak a curve a few
percent.
My .02
Jim Rich
On 10/12/07 9:35 AM, "James Lukens-Gable" <email@hidden> wrote:
> I was hoping for some advice on our color management here at Penn State. In
> advance, I am relatively new to color management, so I apologize for the
> ³newbie² questions.
>
> We have installed an iGen 3 and Xerox is working with us to fine tuning
> color output by adjusting the various input/output settings as well manually
> adjusting curves at the RIP, particularly PMS colors, to closely match
> offset work that is produced here as well.
>
> We have a demo model of a Phaser 7760DN, and ideally would like this to
> ³closely match² the output of the iGen.
>
> We have GM EyeOne to do color measurements and calibrations, as well as
> EyeOne Match 3.6.1 software.
>
> Looking over the literature from Xerox, it appears that we will need to
> purchase the PhaserMatch software to generate the ICC profile for color
> correction (generated by the PhaserMatch software from the ICC profile for
> the 7760 and the ICC profile of the iGen I believe they refer to this as a
> TekColor Correction) and then download this to the 7760. Is this the case?
>
> I have lots of other questions regarding this scenario, and I¹d like to
> start off on the right path.
>
> Thank you.
>
>
> -----------------
>
> Jim Lukens-Gable
> Art Director
> Penn State Multimedia & Print Center
> The Pennsylvania State University
> 102A Hostetter Building
> University Park PA 16802-1002
>
> 814-865-6946
> 814-865-7544 MPC Main Office
> 814-863-6376 Fax
> email@hidden
>
> www.multimediaprint.psu.edu
>
>
> "If the only tool you have is a hammer, you will see every problem as a
> nail."
> - Abraham Maslow
>
>
> _______________________________________________
> Do not post admin requests to the list. They will be ignored.
> Colorsync-users mailing list (email@hidden)
> Help/Unsubscribe/Update your Subscription:
>
> This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden