Re: HP Z3100 & Quark 7 (Dennis Dunbar)
Re: HP Z3100 & Quark 7 (Dennis Dunbar)
- Subject: Re: HP Z3100 & Quark 7 (Dennis Dunbar)
- From: "Marc Aguilera" <email@hidden>
- Date: Fri, 25 Jan 2008 18:53:05 -0800
I own a small design agency as well. We have a Z3100 Non-PS. We have to use
> a RIP and use EFI Designer Edition 5.1. I build CMYK profiles using HP's
> APS and print the CMYK target through EFI Designer Edition (then load the
> target as a sheet on the Z3100 and tell APS to build a CMYK profile - the
> Z3100 reads in the target). Once the profile is built I link the profile in
> the RIP and apply RIP Based Color Management in our workflow. Meaning,
> designers choose the EFI PPD and choose Printer / PostScript Color
> Management from In-Design, Quark, Photoshop, Illustrator etc. They key is
> having a RIP so designers don't have to mess with a bunch of settings and
> with a RIP can profile for CMYK.
Marc Aguilera
Color Management Director
encompus inc
>
>
>
> A client of mine is a small agency, (about 10 people), with an HP
> Z3100. Their workflow has them printing from Quark 7 and Illustrator
> CS3. Since I have not worked with this printer before I had a few
> questions I was hoping the list members could answer.
>
> 1) I know this has a built in EyeOne and can build it's own profiles.
> How are the profiles then applied?
>
> 2) Since the client does not have a RIP running this printer what
> would be the best way to get color managed prints when printing from
> Quark 7? And Illustrator?
>
> 3) I know Quark 6.5 had poor color management at the best. How much
> better is Quark 7's. (I know it has better options - how well do they
> work?)
>
> Thanks!
>
> Dennis Dunbar
>
>
>
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden